Pro-Music-News Pro Audio

Soundcraft's Si series welcomes Si1 digital console with a small footprint

At PLASA 2009 in London, a third member joined the successful Si Series family—the even more compact Soundcraft Si1 digital live sound console. In just nine months, Soundcraft has now launched three models in this range, simplifying the transition from analogue to digital. The new Si1 has a very compact footprint of just 1200mm width, meaning it fits nicely into space-restricted areas such as theatres, small venues, and Houses of Worship.
As standard the Si1 has 32 microphone inputs mapped on 16 faders, and with four dedicated stereo line channels, four dedicated FX returns from the four stereo Lexicon FX processors can mix up to 48 inputs. Eight balanced insert sends and returns are provided, along with the same bus structure as the Si2 and Si3 of 24 Group/Aux busses, eight matrix busses and a full complement of monitor talkback and main bus outputs. These busses may be freely assigned to any of the 16 physical XLR connectors in addition to the dedicated mix and monitoring output XLRs. Every bus has a dedicated 30-band BSS Audio graphic EQ, permanently patched in with no additional drain on DSP resource. Three option card slots are provided for further expansion such as recording of all the channel direct output feeds or increasing the number of channels to mix.
Such is the power and topology of the Si Series that the separate DSP and control engines allow you to make any system or function changes live with no interruption in the audio.
Like the Si3 and Si2, the Si1 uses a combination of rotary encoders and OLED screens on every channel so the engineer mixes at source, without recourse to a central screen. Using the center section and channel encoders, it is possible to simultaneously monitor and control input EQ, input dynamics and output EQ. Four assignable on-board Lexicon effect engines supplement four stereo inputs. Soundcraft’s offline editor program, Virtual Si, can also be used to setup and manage complete shows offline, for later download to an Si1 console through a USB memory key.
Soundcraft Si1 digital mixing console
The Si1 can simply drop in where an existing analogue mixer sat, utilising existing copper cable snakes and splitter systems.
© 09/2009 pro-music-news™
© 1997 © 2009 Pro-Music-News™. All rights reserved. Thank you for visiting Pro-Music-News™.