Contracting Market
Installed Sound Applications

AT launch 3 ES microphones for the contracting market


index installed sound applicationsEmail to Pro-Music-Newssearch-site, guestbook and classifiedsmain index pro-music-news
At PLASA 2003 Audio-Technica expanded its Engineered Sound range of microphones with the addition of the ES905/C Cardioid Condenser Rigid-Pipe Microphone, ES905/H Hypercardioid Condenser Rigid-Pipe Microphone and ES905/ML MicroLine Condenser Rigid-Pipe Microphone. All three models feature a rigid-pipe design with ball-in-socket base that permits flexible positioning and allows easy mounting to a podium, table, or desk with the included hardware. The three microphones build upon A-T's popular and extensive Engineered Sound (ES) line of products and signal the company's ongoing commitment to the fixed installation/sound contracting market.
The ES905/C cardioid condenser rigid-pipe microphone has a cardioid polar pattern providing a 120 angle of acceptance with an extended frequency response of 30 - 20,000 Hz and includes a low-frequency roll-off (80 Hz, 12 dB/octave). The ES905/C has the ability to handle high SPLs (up to 138 dB, 1 kHz at 1% T.H.D) and a dynamic range of 109 dB without sacrificing high frequency performance. The ES905/H hypercardioid condenser rigid-pipe microphone features the same engineering specifications, but with a hypercardioid polar pattern providing a 100 angle of acceptance. Both microphones have a permanently attached 9.5' miniature low-noise cable connected to an in-line power module (included) containing the microphone electronics. The ES905/C and ES905/H plug directly into a 3-pin XLRM-type output connector that can be easily powered from any external 11V to 52V DC phantom power supply. The microphones come in a low-reflective black finish; each measures 16.78" (long) x 0.33" (head diameter) and weighs 10 oz.
The ES905/ML MicroLine condenser rigid-pipe microphone features a MicroLine polar pattern that provides a 90 angle of acceptance with an extended frequency response of 30 - 20,000 Hz and includes a low-frequency roll-off (80 Hz, 12 dB/octave). The ES905/ML has the ability to handle high SPLs (up to 133 dB, 1 kHz at 1% T.H.D) and a dynamic range of 107 dB without sacrificing high frequency performance. The mic features the same permanently attached and in-line power module as the C model. The ES905/ML comes in low-reflective black finish, measures 21.47" (long) x 0.31" (head diameter) and weighs 10.4 oz.
The ES905/C, ES905/H, and ES905ML are designed to provide contractors versatility when choosing components for demanding applications such as boardrooms, schools, council chambers, courtrooms and places of worship.
At 115th AES in New York City Audio-Technica will be exhibting at booth 436.
Audio-Technica ES 905
©  10/2003 pro-music-news

index installed sound applicationsEmail to Pro-Music-Newssearch-site, guestbook and classifiedsmain index pro-music-news
©1997 ©2003 Pro-Music-News. All rights reserved. Thank you for visiting Pro-Music-News.